77
3
BIOS Setup
CAS Latency Time (tCL)
This field is used to select the clock cycle of the CAS latency time.
The option selected specifies the timing delay before SDRAM starts
a read command after receiving it.
RAS# to CAS# Delay (tRCD)
This field is used to select the RAS# to CAS# delay time when
reading and writing to the same bank.
RAS# Precharge (tRP)
This field is used to select the idle clocks after issuing a precharge
command to the DRAM.
Precharge Delay (tRAS)
The options are Auto, and 9 to15.
ALL Precharge to Act
The options are Auto, and 2 to 9.
REF to ACT Delay (tRFC)
The options are Auto, and 16 to 33..
Performance LVL (Read Delay)
This field is used to configure the performance LVL.
Read Delay Phase Adjust
Refer to the following pages for more information on this submenu.
MCH ODT Latency
The options are Auto, and 1 to 12.
Write to PRE Delay (tWR)
The options are Auto, and 6 to 18.
