www.d
fi
.com
18
Chapter 4 Jumper Settings
Chapter 4
Auto Power-on Select
3
1 2
3
1 2
JP13 is used to select the method of powering-on the system. If you want the system to
power-on whenever AC power comes in, set JP13 pins 2 and 3 to On. If you want to use the
power button, set pins 1 and 2 to On.
When using JP13 “Power On” feature to power the system back on after a power failure oc-
curs, the system may not power on if the power lost is resumed within 5 seconds (power
flicker).
1-2 On:
Power-on via power button
(default)
2-3 On:
Power-on via AC power
JP13
SATA DOM Power Select
2-3 On: +5V
Note:
SATA port 0 provides adequate space for SATA DOM.
JP12 is used to select the power level of SATA DOM.
1-2 On: GND (default)
1
3
2
1
3
2
JP12
SATA 0
