39
www.dfi.com
Chapter 7 BIOS Setup
Chapter 7
COM A and COM B
Enable or disable the serial redirection function for each of the serial ports on the sys-
tem. And configure the serial communication parameters to be used between the system
and a remote station.
UseGlobalSetting
Choose to use the pre-configured global settings from the previous menu or configure a
different setting for each serial port.
COM Port 1 and COM Port 2
Enable or disable each serial port.
Disable
Disable this serial port.
Enable
Enable this serial port.
It also shows the Base I/O address and the assigned interrupt number.
Type
Choose RS232, RS422 or RS485 (Peer-to-Peer) for the serial port type for COM port 1 and 2.
WDT
Enable or disable the watchdog function. A counter will appear if you select to enable WDT.
Input any value between 1 and 255.
Super I/O
Console redirection lets you monitor and control the system from a remote station by re-direct-
ing the host screen output through a serial port.
