DFI ICX610-C621A User Manual Download

Page: 40 / 44

Chapter 3

BIOS SETTINGS

User's Manual |

ICX610-C621A

PXE Boot capability

This field is only available when "Boot Type" is set to “UEFI Boot Type” or “Dual Boot Type”, and

when "Network Stack" is enabled.

Disabled

Suppoort Network Stack

UEFI

IPv4/IPv6

Legacy

Legacy PXE OPROM only

PXE Boot to LAN

Enable or disable Boot into the Pre-boot Execution Environment (PXE) stored in the LAN. This

field is only available when "Boot Type" is set to “Legacy Boot Type” or “Dual Boot Type”, and

when "Network Stack" is enabled.

USB Boot

Enable or disable booting to USB boot devices.

Quiet Boot

Enable or disable booting in text mode.

EFI/Legacy

Configure boot priorities in this submenu. Re-arrange the order by pressing -/+ or F5/F6 to

move the highlighted item down/up the priority list. This field is only available when the system

detects any boot device.

Normal Boot Menu

Select a priority arranging method.

Normal

Boot priority is arranged according to the type of the storage devices, and the

configured order.

Advance

Boot priority is arranged according to the configured order regardless of the

type of the storage devices.

►

Boot Type Order

Arrange the priority of types of the storage devices.

Hard Disk Drive/

CD/DVD-ROM Drive /

USB /

PXE /

Others

Arrange the priority of the storage devices in each category. The submenu will not be displayed

when there is no available storage device of the type.

Note:

When a desired LAN port for PXE boot is not listed as a boot device, please con-

firm that the "PXE Boot to LAN", "PXE boot capability", "Network Stack" and the

LAN controller of the said LAN (go to "Advanced" > "PCI Express Configuration")

are enabled. Please press F10 to save the settings and re-start the system board

for the settings to take effect.

InsydeH2O Setup Utility

Rev. 5.0

Help

Esc

Exit

↑/↓

Select Item

←/→

Select Item

F5/F6

Change Values

Enter

Select

SubMenu

Setup Defaults

F10

Save and Exit

Select Normal Boot Option

Priority or Advance Boot

Option Priority

EFI/Legacy

Normal Boot Menu

►

Boot Type Order

►

Hard Disk Drive

►

CD/DVD-ROM Drive

►

USB

►

PXE

►

Others

Boot

<Normal>

Boot

Summary of Contents for ICX610-C621A













































Search results

Summary of Contents for ICX610-C621A

Reviews:

Related manuals for ICX610-C621A

Brands by name

Popular brands

DFI ICX610-C621A, User Manual

Search results

Summary of Contents for ICX610-C621A

Reviews:

Related manuals for ICX610-C621A

Brands by name

Popular brands