DFI HD332-H81 User Manual Download Page 13

Page: 13 / 82

Rear Panel I/O
Ports

• 1 mini-DIN-6 port for PS/2 mouse/keyboard

• 2 DB-9 RS232 serial ports

• 2 VGA ports; or

1 VGA and 1 DVI-I ports

• 2 RJ45 LAN ports

• 4 USB 3.0 ports

• 2 USB 2.0 ports

• Line-in/Surround, Line-out, Mic-in/Subwoofer jacks

I/O Connectors

• 2 connectors for 4 external USB 2.0 ports and

1 vertical USB 2.0/1.1 port; or

3 connectors for 6 external USB 2.0 ports* (optional)

• 8 connectors for 8 external serial ports (2.0mm pitch)

- 1 RS232/RS422/RS485 (RS232 and/or power)* (optional)

- 7 RS232

• 1 parallel connector

• 4 Serial ATA connectors

• 1 24-pin ATX power connector

• 1 8-pin 12V power connector

• 1 chassis intrusion connector

• 1 front panel connector

• 2 fan connectors

USB
Interface

• XHCI Host Controller supports up to 2 super speed USB 3.0 ports

Trusted Platform
Module - TPM*
(optional)

• Provides a Trusted PC for secure transactions

• Provides software license protection, enforcement and password protection

BIOS

• AMI BIOS

- 64Mbit SPI BIOS

WatchDog Timer

• Software programmable from 1 to 255 seconds

Energy Effi cient
Design

• Supports ErP Lot6 power saving* (optional)

• Supports ACPI

• System Power Management

• Wake-On-Events include:

- Wake-On-PS/2 KB/Mouse

- Wake-On-USB KB/Mouse

- Wake-On-LAN

- RTC timer to power-on the system

• CPU stopped clock control

• AC power failure recovery

Damage Free
Intelligence

• Monitors CPU/system temperature and overheat alarm

• Monitors VCORE/5V/3.3V/V_DIMM/12V/3VSB/VBAT voltages and failure alarm

• Monitors CPU/system fan speed and failure alarm

• Read back capability that displays temperature, voltage and fan speed

Power
Consumption

• HD332-H81X (VGA+DVI/VGA): 69.10W with i7-4770S at 3.10GHz and 2x 4GB

DDR3 DIMM

Chapter 1 - Introduction

Specifications

Processor

• LGA 1150 socket for:

- 4th Generation Intel

Core

processors

: Intel

Core

i7-4790S (8M Cache, up to 4.0 GHz); 65W

: Intel

Core

i7-4770S (8M Cache, up to 3.9 GHz); 65W

: Intel

Core

i7-4770TE (8M Cache, up to 3.3 GHz); 45W

: Intel

Core

i5-4590S (6M Cache, up to 3.7 GHz); 65W

: Intel

Core

i5-4590T (6M Cache, up to 3.0 GHz); 35W

: Intel

Core

i5-4570S (6M Cache, up to 3.6 GHz); 65W

: Intel

Core

i5-4570TE (4M Cache, up to 3.3 GHz); 35W

: Intel

Core

i3-4360 (4M Cache, 3.7 GHz); 54W

: Intel

Core

i3-4350T (4M Cache, 3.1 GHz); 35W

: Intel

Core

i3-4340TE (4M Cache, 2.6 GHz); 35W

: Intel

Core

i3-4330 (4M Cache, 3.5 GHz); 54W

: Intel

Core

i3-4330TE (4M Cache, 2.4 GHz); 35W

: Intel

Pentium

G3420 (3M Cache, 3.2 GHz); 53W

: Intel

Pentium

G3320TE (3M Cache, 2.3 GHz); 35W

: Intel

Celeron

G1820 (2M Cache, 2.7 GHz); 53W

: Intel

Celeron

G1820TE (2M Cache, 2.2 GHz); 35W

• 22nm process technology

Chipset

• Intel

H81 Express Chipset

Super I/O
Address

• NCT6102/4Eh (HD332-H81B)

• NCT6106/4Eh (HD332-H81X)

System Memory

• Two 240-pin DDR3 DIMM sockets

• Supports DDR3 1333/1600MHz when operating at 1.5V

• Supports dual channel memory interface

• Supports up to 16GB system memory

• DRAM device technologies: 1Gb, 2Gb and 4Gb DDR3 DRAM technologies are

supported for x8 and x16 devices, unbuffered, non-ECC

Expansion Slots

• 1 PCIe x16 Gen 3 slot (PCIe 3.0)

• 2 PCIe x1 Gen 2 slots (PCIe 2.0)

• 1 PCI slot (PCI 2.3)

Graphics

• Intel

HD Graphics

• Display ports: 1 VGA, 1 VGA/DVI-I (DVI-D signal)

• VGA: 24-bit, resolution up to 1920x1200 @60Hz

• DVI-D: resolution up to 1920x1200 @60Hz

• Supports 20 Graphics Execution Units (EUs)

• Intel

Clear Video Technology

• DirectX Video Acceleration (DXVA) support for accelerating video processing

• Supports DirectX 11.1 and OpenGL 4.0

Audio

• Realtek ALC888 5.1-channel High De

nition Audio

• Audio outputs: Mic-in/Subwoofer, Line-in/Surround and Line-out

LAN

• 2 Intel

82574L Gigabit Ethernet Controllers; or

2 Intel

I210 PCI Express Gigabit Ethernet controllers* (optional)

• Integrated 10/100/1000 transceiver

• Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab

Serial ATA

• 2 SATA 3.0 ports with data transfer rate up to 6Gb/s

• 2 SATA 2.0 ports with data transfer rate up to 3Gb/s

- SATA port 1 provides adequate space for SATA DOM

• Integrated Advanced Host Controller Interface (AHCI) controller

Chapter 1

Chapter 1 Introduction

www.d

.com

Summary of Contents for HD332-H81



















































































Search results

Summary of Contents for HD332-H81

Reviews:

Related manuals for HD332-H81

Brands by name

Popular brands

DFI HD332-H81, User Manual

Search results

Summary of Contents for HD332-H81

Reviews:

Related manuals for HD332-H81

Brands by name

Popular brands