www.dfi.com
38
Chapter 3 BIOS Setup
Chapter 3
USB 3.0 Support
Enables or disables USB 3.0 (XHCI) Controller support.
XHCI Hand-off
This is a workaround for OSes without XHCI hand-off support. The XHCI ownership
change should be claimed by XHCI driver.
EHCI Hand-off
This is a workaround for OSes that does not support EHCI hand-off. The EHCI owner-
ship change should be claimed by the EHCI driver.
PIONEER DVD-RW DVR-XD11 1.00
Selects the type of Mass storage device emulation. “Auto“ enumerates devices accord-
ing to their media format. Optical drives are emulated as “CD-ROM.“ Drives with no
media will be emulated according to the drive type.
Super IO Configuration
This section is used to configure the I/O functions supported by the onboard Super I/O chip.
Restore AC Power Loss
help.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Super IO Configuration
Super IO Chip
Restore AC Power Loss
WatchDog Timer Unit
SuperIO Watchdog Timer
Serial Port 0 Configuration
Serial Port 1 Configuration
Advanced
NCT6102D
[Power Off]
[Second]
0
→ ←:
Select Screen
↑↓:
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
Restore AC Power Loss
Power Off
When power returns after an AC power failure, the system’s power is off. You
must
press the Power button to power-on the system.
Power On
When power returns after an AC power failure, the system will automatically power-on.
Last State
When power returns after an AC power failure, the system will return to the state
where you left off before power failure occurs. If the system’s power is off when AC
power failure occurs, it will remain off when power returns. If the system’s power is on
when AC power failure occurs, the system will power-on when power returns.
