85
3
BIOS Setup
Suspend Mode
When the system enters the Suspend mode, the CPU and onboard
peripherals will be shut off.
HDD Power Down
This is selectable only when the Power Management field is set to
User Define. When the system enters the HDD Power Down mode
according to the power saving time selected, the hard disk drive will
be powered down while all other devices remain active.
Soft-Off by PWR-BTTN
This field allows you to select the method of powering off your
system.
Delay 4 Sec.
Regardless of whether the Power Management func-
tion is enabled or disabled, if the power button is
pushed and released in less than 4 sec, the system
enters the Suspend mode. The purpose of this func-
tion is to prevent the system from powering off in
case you accidentally “hit” or pushed the power but-
ton. Push and release again in less than 4 sec to
restore. Pushing the power button for more than 4
seconds will power off the system.
Instant-Off
Pressing and then releasing the power button at
once will immediately power off your system.
Wake-Up Event
Set this field to Enabled to wake up the system via the onboard
LAN, external modem or a card that uses the PCI PME (Power
Management Event) signal to remotely wake up the system.
Power On By Ring
When this field is set to Enabled, the system will power-on to respond
to calls coming from a modem.
