76
3
BIOS Setup
IDE Primary Master/Slave UDMA and IDE Secondary Master/
Slave UDMA
These fields allow you to set the Ultra DMA in use. When Auto is
selected, the BIOS will select the best available option after checking
your hard drive or CD-ROM.
Auto
The BIOS will automatically detect the settings for
you.
Disabled
The BIOS will not detect these categories.
On-Chip Serial ATA
Disabled
Disables the onboard SATA.
Auto
The system will detect the existing SATA and
IDE drives then automatically set them to the
available master/slave mode.
Combined Mode
This option allows you to combine both IDE
and SATA drives; supporting maximum of 2
drives on each channel.
Enhanced Mode
This option allows you to use both IDE and
SATA drives; allowing a maximum of 6 drives.
SATA Only
This option automatically sets the SATA drives
to Primary Master mode. Since the SATA
drives are in Master mode, you cannot set the
IDE drive to Master mode.
Serial ATA Port0 Mode and Serial ATA Port1 Mode
These fields are used to select the master/slave mode of the Serial
ATA drives. Make sure they do not conflict with the settings of the
IDE hard drives.
