20
On: CMOS Clear
Off: Normal (default)
Jumper JP10
CMOS Clear Select
If, for some reason, the CMOS becomes corrupted, the system can be
reconfigured with the default values stored in the ROM BIOS. To load
the default values, power off your system and set JP10 to On. Then
power on your system for 5 seconds and turn it off again. Set JP10
back to its default setting, Off.
Jumper Settings for CMOS Clear
Factory Testing Jumpers
The jumpers below are for factory testing only and should always be set
to their default configuration. Reconfiguring these jumpers will cause
problems with your system board.
JP8:
1-2 On (28F010/28F1000)
2-3 On (29EE010/29F010)
JP9:
On
JP11:
Off
