81
3
BIOS Setup
3.1.5.3 Run VGABIOS if S3 Resume
When this field is set to Auto, the system will initialize the VGA BIOS
when it wakes up from the S3 state. This can be configured only if
the “ACPI Suspend Type” field is set to “S3(STR)”.
3.1.5.4 Power Management
This field allows you to select the type (or degree) of power saving
by changing the length of idle time that elapses before the HDD
Power Down field is activated.
Min Saving
Minimum power saving time for the HDD Power
Down = 15 min.
Max Saving
Maximum power saving time for the HDD Power
Down = 1 min.
User Define
Allows you to set the power saving time in the
“HDD Power Down” field.
3.1.5.5 Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank
This selection will cause the system to turn
off the vertical and horizontal synchronization
ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS
Initializes display power management signaling. Use
this option if your video board supports it.
3.1.5.6 Video Off In Suspend
This field is used to activate the video off feature when the system
enters the Suspend mode.
3.1.5.7 Suspend Type
The options are Stop Grant and PwrOn Suspend.
3.1.5.8 MODEM Use IRQ
This field is used to set an IRQ channel for the modem installed in
your system.
