Energy Star Compliant System Board
IDE HDD Auto Detection
This option detects the hard disk parameters for the hard
disk drives installed in your system. Highlight this
option and press <Enter>. A screen similar to the one
below will appear.
The screen displays the parameters detected and allows
you to accept or reject the parameters. Type "Y" and
press <Enter> to accept the parameters or press <Esc>
to abort. If you select "Y," the parameters of the hard
disk will be displayed in the Standard CMOS Setup.
Save & Exit Setup
When all the changes have been made, highlight "Save &
Exit Setup" and press <Enter>. The message below will
appear:
Save to CMOS and Exit (Y/N)? N
ROM ISA BIOS
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
CYLS.
980
HEADS
5
PRECOMP
65535
LANDZONE
979
SECTORS
17
Do you accept this drive C (Y/N)? N
ESC : Skip
Drive C :
(40MB)
3-11
u
Initial Setup Program
