G486-EVA
Jumper JP34
High Speed Mode for VL-Bus Board
Set Jumper JP34 to Off only if the VESA VL-Bus
add-on board(s) installed in the VL-Bus slots support
Zero Wait State. If you are not sure that your add-on
board(s) support Zero Wait State, set JP34 to On;
otherwise, a system error may occur.
On: Write One Wait State
(Default)
Off: Write Zero Wait State
Jumper JP35
CPU Speed for VL-Bus Board
If a VL-Bus board is installed in the G486-EVA system
board, Jumper JP35 must be set to On if the CPU speed
is greater than 33MHz. Set JP35 to Off if the CPU
speed is less than or equal to 33MHz.
On: CPU Speed > 33MHz
(Default)
Off: CPU Speed <= 33MHz
Installation Overview
u
2-9
