www.dfi.com
26
Chapter 3 Software User Guide
Chapter 3
9. Set the finger switch SW5 to the “SD Card Start Mode“: pins 1, 3, 6, 8 on and 2, 4, 5, 7
off.
10. Power-on the device again to reboot it into the system.
Software Features
General Support
(*) is depended on the NXP support.
Component Name
Base-Line Feature
General
OS Support
Yocto 1.8 - Kernel 3.14.52 (default preloaded on eMMC)
Android 5.1.1 - Kernel 3.14.52
Misc
Firmware Upgrade (*)
MFGTool firmware update tool
Utilities (*)
Hardware diagnostic utilities
Linux AP/API Support
(*) is depended on the NXP support.
Boot Mode/Device Select
(SW5)
Pins 1,3,6,8 ON 2,4,5,7 OFF
ON
1 2 3 4 5 6 7 8
Component Description
Detail
Linux
Yocto 1.8 - Kernel 3.14.52
It is an open-source project that delivers a
set of tools which create operating system
images for embedded Linux systems.
Support X-11 Demo Image Only (*)
Linux
AP/API
NXP i.MX6 Yocto 1.8 BSP
Support X11 Window
Support BitBake build tool
All library and utility should support (*).
Source code package (support by request)
Support I
2
C, Watchdog, GPIO,
LVDS brightness control
Provide support console for i.MX6 platform
Android
Android 5.1.1 - Kernel 3.14.52
Support Demo Image
Android
AP/API
NXP i.MX6 Android 5.1.1 NXP BSP
Support Android AOSP launcher
Support Android ADB shell
Support Android APK install
All library, utility and Android apk should
support (*).
Source code package (support by request)
Support I
2
C, Watchdog, GPIO,
LVDS brightness control
Provide support console for i.MX6 platform.
