www.dfi.com
21
Chapter 3 Software User Guide
Chapter 3
Chapter 3 - Software User Guide
►
Introduction
FS053 platform is an embedded system with Yocto 1.8 preloaded on eMMC. Demo images are
supported under Yocto 1.8 and Android 5.1.1 environment.
►
Revision Control
The system board of a specific revision — Rev. A or Rev. B — is only compatible with the soft-
ware images that correspond to its revision. It is strongly recommended against that a Rev. A
system be loaded with Rev. B images or vice versa. Failure in loading a compatible image onto
the system may result in malfunction and unexpected errors.
►
Check Board Type
The CPU core type of the system board dictates which images and only which images can be
loaded. Identify which of the two core types the board is before proceeding — i.MX6 DualLite
CPU or i.MX6 Quad CPU.
►
Loading Images
Download Images to eMMC with MFGTool
1. Set the finger switch SW5 to “Serial Downloader Mode”: pins 7 on and 8 off.
2. Plug in the Micro USB cable to your PC and power-on the FS053.
Important:
The adapter output voltage is 9~36V for FS053.
+
-
Boot Mode/Device Select
(SW5)
Pins 1, 2, 5, 6, 7 ON
ON
1 2 3 4 5 6 7 8
FS053 DualLite
FS053 Quad
SW5
SW5
Micro USB Cable
