www.dfi .com
25
Chapter 3 Software User Guide
Chapter 3
8. After the burning is done, click “Stop” and turn the power off.
9. Set the finger switch SW5 to the “SPI Start Mode”: pins 4, 5, 8 on and 6, 7 off.
ON
1 2 3 4 5 6 7 8
Download Images to SD Card with MFGTool
1. Set the finger switch SW5 to “SD Card Download Mode”: pins 1, 3, 6, 7 on and 2, 4, 5,
8 off.
ON
1 2 3 4 5 6 7 8
2. Plug in the Micro USB cable to your PC and power-on the FS051.
Important:
1. The adapter output voltage is 5V for FS051.
2. Do not insert SD card before turning on the device power.
10. Power-on the device again to reboot it into the system.
+
-
Micro USB Cable
