www.dfi .com
24
Chapter 3 Software User Guide
Chapter 3
Download Uboot Images to SPI with MFGTool
1. First complete above “Download Images to eMMC with MFGTool” steps.
2. Set the finger switch SW5 to “Serial Downloader Mode”: pins 7 on and 8 off.
4. Unzip Image package on your PC.
5. Yocto image: execute “\\[core type]\
yocto-spi-fs051_[core type]-u-boot.vbs
”.
For example, for DualLite CPU, execute “\\DualLite_core\yocto-spi-fs051_DualLite-u-boot.vbs”.
Android image: execute “\\[core type]\
android-spi-fs051_[core type]-u-boot.vbs
”.
For example, for DualLite CPU, execute
“\\DualLite_core\android-spi-fs051_DualLite-u-boot.vbs”.
6. You will see the device connected as “HID-compliant device.”
7. After all preparation is done,
click “Start” to burn the file. Wait until the process ends.
3. Plug in the Micro USB cable to your PC and power-on the FS051.
Important:
The adapter output voltage is 5V for FS051.
ON
1 2 3 4 5 6 7 8
+
-
Micro USB Cable
