www.dfi .com
20
Chapter 3 Installing the Devices
Chapter 3
8. Insert the CPU into the socket. The gold triangular mark on the CPU must align with the
corner of the CPU socket as the photo shown below.
The CPU’s notch will at the same time fit into the socket’s alignment key.
Alignment key
Gold triangular mark
Alignment key
7. Remove the protective cap from the CPU socket. The cap is used to protect the CPU sock-
et against dust and harmful particles. Remove the protective cap only when you are about
to install the CPU.
Load lever
Load plate
6. Lifting the load lever will at the same time lift the load plate and lift the load lever up to
the angle as the photo shown below.
Protective cap
