45
Chapter 7 BIOS Setup
Chapter 7
www.dfi .com
NCT6106D Super IO Features
This section is used to configure some control functions.
Control the status when
power loss occurs.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
NCT6106D Super IO Features
Power-Loss State
Case Open Warning
WatchDog Count Mode
WatchDog TimeOut Value
Advanced
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save Changes and
Reset
ESC: Exit
[Always off]
[Disabled]
[Second]
0
Power-Loss State
Control the status when the power loss occurs.
Power Off
When power returns after an AC power failure, the system’s power is off. You
must
press the Power button to power-on the system.
Power On
When power returns after an AC power failure, the system will automatically power-on.
Last State
When power returns after an AC power failure, the system will return to the state
where you left off before power failure occurs. If the system’s power is off when AC
power failure occurs, it will remain off when power returns. If the system’s power is on
when AC power failure occurs, the system will power-on when power returns.
Case Open Warning
Enable or disable the function of the case open warning.
WatchDog Count Mode
Select the watchdog count mode: second or minute.
WatchDog TimeOut Value
Enter the value to fill the watchdog timeout value. 0 means Disabled.
Serial Port Console Redirection
This section is used to configure the console redirection of serial COM port 1.
Console Redirection En-
able or Disable.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
COM
1
Console Redirection
Console Redirection Settings
RTL8111EP LAN (PCI Bus1, Dev2, Func0)
Console Redirection
Console Redirection Settings
Advanced
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save Changes and
Reset
ESC: Exit
[Disabled]
[Disabled]
Console Redirection
Enable or disable the function of console redirection. When the console redirection is
enabled, you will be able to configure the console redirection settings.
Console Redirection Settings
The settings specify how the host computer and the remote computer (which the user
is using) will exchange data. Both computers should have the same or compatible set-
tings.
Emulation: ANSI:
Extended ASCII char set.
VT100: ASCII char set.
VT100+: Extends VT100
to support color, function
keys, ect. VT-UTFB: uses
UTFB encoding to map
unicode chars onto 1 or
more bytes.
Aptio Setup Utility - Copyright (C) 2015 American Megatrends, Inc.
Version 2.17.1246. Copyright (C) 2015 American Megatrends, Inc.
COM 1/RTL8111EP LAN (PCI Bus1, Dev2, Func0)
Console Redirection Settings
Terminal Type
Bits per second
Data Bits
Parity
Stop Bits
Flow Control
VT-UTFB Combo Key Support
Recorder Mode
Resolution 100x31
Legacy OS Redirection Resolution
Putty KeyPad
Redirection After BIOS POST
Advanced
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save Changes and
Reset
ESC: Exit
[ANSI]
[115200]
[8]
[None]
[1]
[None]
[Enabled]
[Disabled]
[Disabled]
[80x25]
[VT100]
[Always Enable]
