59
!
Award BIOS Setup Utility
3.1.3 Advanced Chipset Features
This section gives you functions to configure the system based on
the specific features of the chipset. The chipset manages bus speeds
and access to system memory resources.
These items should not
be altered unless necessary.
The default settings have been chosen
because they provide the best operating conditions for your system.
The only time you might consider making any changes would be if
you discovered some incompatibility or that data was being lost
while using your system.
SDRAM CAS Latency Time
The default setting is 3 which is 3 clock cycles for the CAS latency.
SDRAM Cycle Time Tras/Trc
This field selects the number of SCLKs for an access cycle. The
default is 6/8.
SDRAM RAS-to-CAS Delay
This field allows you to insert a timing delay between the CAS and
RAS strobe signals, used when DRAM is written to, read from, or
refreshed. This field applies only when synchronous DRAM is installed
in the system.
The settings on the screen are for reference only. Your version may not be
identical to this one.
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
Advanced Chipset Features
SDRAM CAS Latency Time
SDRAM Cycle Time Tras/Trc
SDRAM RAS-to-CAS Delay
SDRAM RAS Precharge Time
System BIOS Cacheable
Video BIOS Cacheable
Delayed Transaction
Onboard Video
* Onboard Display Cache Setting *
CAS# Latency
Paging Mode Control
RAS-to-CAS Override
RAS# Timing
RAS# Precharge Timing
Cache Memory Frequency
3
6/8
3
3
Disabled
Disabled
Enabled
Enabled
Item Help
Menu Level
↑↓→←
Move
F6:Fail-Safe Defaults
F7:Optimized Defaults
F1:General Help
Enter:Select
F5:Previous Values
+/-/PU/PD:Value
F10:Save
ESC:Exit
3
Close
by CAS# LT
Slow
Slow
100MHz
