20
Hardware Installation
Wake-On-Keyboard/Wake-On-Mouse - Jumper JP1
The Wake-On-Keyboard/Wake-On-Mouse function allows you to use
the keyboard or PS/2 mouse to power-on the system. By default,
JP1 is disabled. To use this function, set JP1 to 2-3 On. Keyboard/
Mouse Power On in the Integrated Peripherals submenu of the
BIOS must be set accordingly. Refer to chapter 3 for details.
Warning:
If JP1 was enabled with a password set in the KB Power
On Password field, and now you wish to disable the
keyboard password function, make sure to set the
Keyboard/Mouse Power On field to Disabled prior to
setting JP1 to disabled. You will not be able to boot up the
system if you fail to do so.
1
2
3
1
2
3
2-3 On: Enable
1-2 On: Disable
(default)
2.5 Jumper Settings for Wake-On-Keyboard/
Wake-On-Mouse
