background image

53

3

Award BIOS Setup Utility

SDRAM RAS Precharge Time

If there is insufficient number of cycles for the RAS to accumulate its

charge before DRAM refresh, the refresh may be incomplete and the

DRAM may fail to retain data.

System BIOS Cacheable

When this field is enabled, accesses to the system BIOS ROM

addressed at F0000H-FFFFFH are cached, provided that the cache

controller is enabled. The larger the range of the Cache RAM, the

higher the efficiency of the system.

Video BIOS Cacheable

As with caching the system BIOS, enabling the Video BIOS cache will

allow access to video BIOS addresssed at C0000H to C7FFFH to

be cached, if the cache controller is also enabled. The larger the range

of the Cache RAM, the faster the video performance.

Delayed Transaction

When enabled, this function frees up the PCI bus for other PCI

masters during the PCI-to-ISA transactions. This allows PCI and ISA

buses to be used more efficiently and prevents degradation of

performance on the PCI bus when ISA accesses are made.

AGP-4X Mode

Leave this field in its default setting. Do not alter this setting unless

advised by an engineer or technician.

Display Cache Frequency

100 MHz

Select this option if you are using a 100MHz

frequency GPA card.

133 MHz

Select this option if you are using a 133MHz

frequency GPA card.

Summary of Contents for CS60-EC



























































































Reviews: