DFI CS60-EC, User Manual

Page: 13 / 90

1
Introduction
13
1.1.3 Intelligence
Over Voltage
The Over Voltage function allows you to manually adjust to a higher
core voltage that is supplied to the CPU. Although this function is
supported, we do not recommend that you use a higher voltage
because unstable current may be supplied to the system board
causing damage. Refer to “CPU Vcore Select” in the CPU Frequency
Control section in chapter 3 for more information.
CPU Overclocking
The CPU Overclocking function allows you to set the processor’s
bus clock by 1MHz stepping. However, overclocking may result to
the processor’s or system’s instability and are not guaranteed to
provide better system performance. Refer to “Open Slight Adjust”
and “Clock By Slight Adjust” in the CPU Frequency Control section
in chapter 3 for more information.
Automatic CPU/Chassis Fan Off
The CPU and chassis fans will automatically turn off once the system
enters the Suspend mode.
Dual Function Power Button
Depending on the setting in the “Soft-Off By PWR-BTTN” field of
the Power Management Setup, this switch will allow the system to
enter the Soft-Off or Suspend mode.
Wake-On-Ring
This feature allows the system that is in the Suspend mode or Soft
Power Off mode to wake-up/power-on to respond to calls coming
through an internal or external modem. Refer to “Wake-On-Ring
Connector” in chapter 2 and “Resume On Ring” in the Power
Management Setup section in chapter 3 for more information.
Important:
If you are using a modem add-in card, the 5VSB power source
of your power supply must support
≥
720mA.