DFI CS30-TC, User Manual

Page: 22 / 110

22
Quick Setup Guide
Quick
Setup
Guide
1.3.14 DIMM/PCI Standby Power LED
The DIMM Standby Power LED will turn red when the system’s power is
on or when it is in the Suspend state (Power On Suspend or Suspend to
RAM). It will not light when the system is in the Soft-Off state.
The PCI Standby Power LED will turn red when the system is in the
power-on, Soft-Off or Suspend (Power On Suspend or Suspend to RAM)
state.
Lighted LEDs serve as a reminder that you must power-off the system
then turn off the power supply’s switch or unplug the power cord prior to
installing any memory modules or add-in cards.
3.3VSB Standby for PCI - Jumper J6
On: Default
3.3VSB Standby Power to
PCI slots - PCI 2.2 spec.
Off:
Non-PCI 2.2 spec.
2 1
2 1