1
10
Introduction
Processor
Chipset
System Memory
Expansion Slots
Graphics
Audio
LAN
Serial ATA
IDE
AMT
Chapter 1 - Introduction
• Socket G rPGA 988A for:
- Intel
®
Core
TM
i7-620M (SV)
- Intel
®
Core
TM
i5-520M (SV)
- Intel
®
Celeron
®
P4500 (SV)
• Supports IMVP6.5 up to 35W CPU
• Intel
®
QM57 PCH (Platform Controller Hub)
• Two 204-pin SODIMM sockets
• Supports DDR3 800/1066MHz (PC3-6400/PC3-8500)
• Supports dual channel memory interface
• Supports up to 8GB system memory
• DRAM device technologies: 1Gb and 2Gb DDR3 DRAM tech
-
nologies are suported for x8 and x16 devices, unbuffered,
non-ECC
• 1 PCI Express x16 slot
• 1 PCI Express x4 slot
• 2 PCI slots
• 1 CompactFlash socket
• Intel
®
HD Graphics
• Display ports: DVI-I (CH7318), LVDS and VGA
• LVDS: Single Channel - 18/24-bit; Dual Channel - 36/48-bit
• Intel
®
Clear Video technology
• Intel
®
Dynamic Video Memory Technology (Intel
®
DVMT)
• Intel
®
Smart 2D Display Technology (Intel
®
S2DDT)
• Realtek ALC262 2-channel High Definition Audio
• High performance DACs with 100dB SNR
• ADCs with 90dB SNR
• Two stereo DACs support 24-bit PCM format for stereo au
-
dio playback
• Three stereo ADCs support 20-bit PCM format for multiple
input streaming
• S/PDIF audio interface
• Intel 82577LM with iAMT6.0 Gigabit Ethernet Phy
• Realtek RTL8111C PCI Express Gigabit Ethernet controller
• Integrated 10/100/1000 transceiver
• Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
• Supports wire management
• 6 Serial ATA ports compliant with SATA 1.0a specification
• SATA speed up to 3Gb/s (SATA 2.0)
• Integrated Advanced Host Controller Interface (AHCI) control
-
ler
• Supports RAID 0/1/5/10
• JMicron JMB368 PCI Express to PATA host controller
• DMA mode: Ultra ATA up to 100MB/s
• PIO mode: up to 16MB/s
• Supports iAMT6.0
• Out-of-band system access
• Remote troubleshooting and recovery
Specifications
Summary of Contents for CP330-NRM
