DFI CMS630, User Manual

Page: 43 / 51

43
Chapter 3
BIOS SETTINGS
User's Manual | CMS630
X
PC Health Status
This section displays the PC health status.
InsydeH2O Setup Utility Rev. 5.0
F1 Help
Esc Exit
↑/↓ Select Item
←/→ Select Item
F5/F6 Change Values
Enter Select
X
SubMenu
F9 Setup Defaults
F10 Save and Exit
PC Health Status
Voltage
VBAT
VCORE
VDDQ
5V
+12V
Temperature
System (°C/°F)
CPU (°C/°F)
Fan Speed
SYS_FAN1
CPU FAN
SYS_FAN 2
SYS_FAN 3
CPU Smart Fan Control
Boundary 0
Boundary 1
Boundary 2
Boundary 3
Fan Speed Count 0
Advanced
3.040 V
0.816 V
1.200 V
5.056 V
11.968 V
32.0 C/ 89.6 F
33.0 C/ 91.4 F
939 RPM
0 RPM
0 RPM
0 RPM
<Smart Fan>
[30]
[40]
[50]
[60]
[35]
X
Advanced
X
SIO NCT6126D
Smart Fan
Smart Fan is a fan speed moderation strategy that depends on the current system temperature.
When the system temperature goes higher than the Boundary setting, the fan speed will be
turned up to the setting of the Fan Speed Count that bears the same index as the Boundary
field.
SYS Smart Fan/CPU Smart Fan Control
Enable or disable the system smart fan. When disabled, fan speed will not be controllable ac-
cording to different system temperatures. Instead, a Fix Fan Speed Count field will be displayed
to configure at which speed the fan will always be fixed regardless of system temperature.
▼ CPU / Sytem Fan Mode = [Smart Fan]
Boundary 0 to Boundary 3
Set the boundary temperatures that determine the fan speeds accordingly, the value ranging
from 0-127℃. For example, when the system temperature reaches Boundary 1 setting, the
fan speed will be turned up to the designated speed of the Fan Speed Count 1 field.
Fan Speed Count 0 to Fan Speed Count 3
Set the fan speed, the value ranging from 1-100%, 100% being full speed. The fans will oper-
ate according to the specified boundary temperatures above-mentioned.
▼ CPU / System Fan Mode = [Manual]
Fan Speed Count
Set the fan speed, the value ranging from 1-100%, 100% being full speed. The fans will al-
ways operate at the specified speed regardless of gauged temperatures.
InsydeH2O Setup Utility Rev. 5.0
F1 Help
Esc Exit
↑/↓ Select Item
←/→ Select Item
F5/F6 Change Values
Enter Select
X
SubMenu
F9 Setup Defaults
F10 Save and Exit
Boundary 0
Boundary 1
Boundary 2
Boundary 3
Fan Speed Count 0
Fan Speed Count 1
Fan Speed Count 2
Fan Speed Count 3
SYS Smart Fan1 Control
Boundary 0
Boundary 1
Boundary 2
Boundary 3
Fan Speed Count 0
Fan Speed Count 1
Fan Speed Count 2
Fan Speed Count 3
Advanced
[30]
[40]
[50]
[60]
[35]
[60]
[80]
[100]
<Smart Fan>
[30]
[40]
[50]
[60]
[35]
[60]
[80]
[100]