21
Chapter 2
HARDWARE INSTALLATION
User's Manual |
CMS630
1
USB Ports
The USB device allows data exchange between your computer and a wide range of simultane-
ously accessible external Plug and Play peripherals. The system board is equipped with mul-
tiple USB ports as listed below:
•
2 x USB 3.2 Gen 1 rear ports (USB 1/2)
•
2 x USB 3.2 Gen 2 rear ports (USB 3/4)
•
4 x USB 2.0 rear ports (USB 7/8/9/10)
•
2 x USB 3.1 Gen 2 internal ports (USB 5/6)
•
2 x USB 2.0 internal ports, box headers (USB 11/12)
•
1 x USB 2.0 internal ports, (USB 14)
The internal USB ports may be mounted on a card-edge bracket. Install the card-edge bracket
to an available slot at the rear of the system chassis and then insert the USB port cables to a
connector.
Wake-On-USB Keyboard/Mouse
The Wake-On-USB Keyboard/Mouse function allows you to use a USB keyboard or USB mouse
to wake up a system from the S3 (STR - Suspend To RAM) state.
Pin Assignment
Pin Assignment
1
SBV
2
SBV
3
Data-
4
Data-
5
Data+
6
Data+
7
GND
8
GND
9
---
10
N.C.
USB 2.0 Headers (USB 11/12)
X
Rear I/O Ports
Pin Assignment
Pin Assignment
10
SBV3
11
GND
9
Data-
12
Data-
8
Data+
13
Data+
7
GND
14
GND
6
Data-
15
Data-
5
Data+
16
Data+
4
GND
17
GND
3
Data-
18
Data-
2
Data+
19
Data+
1
GND
20
SBV3
USB 2.0/3.2 Headers (USB 5/6)
10
9
1
2
USB 11/12 (USB 2.0)
22
1010
9 9
1
11
20
10
USB 5/6 (USB 3.2 Gen 2)
USB 7/8/9/10 (USB 2.0)
USB 1/2 (USB 3.2 Gen 1)
USB 3/4 (USB 3.2 Gen 2)
USB 14 (USB 2.0)
