64
3
Award BIOS Setup Utility
Video Off Option
Always On
The system BIOS will never turn off the screen.
Suspend -> Off
The screen is off when the system is in the
Suspend mode.
All Modes
-> Off
The screen is off when the system is in the
Doze, Standby or Suspend mode.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC + Blank
This selection will cause the system to turn
off the vertical and horizontal synchronization
ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS Support
Initializes display power management signaling.
Use this option if your video board supports it.
MODEM Use IRQ
This field is used to select an IRQ channel for the modem installed
in your system.
Soft-Off by PWRBTN
This category allows you to select the method of powering off your
system.
Delay 4 Sec.
Regardless of whether the Power Management
function is enabled or disabled, if the power button
is pushed and released in less than 4 sec, the
system enters the Suspend mode. The purpose of
this function is to prevent the system from powering
off in case you accidentally hit or pushed the
power button. Push and release again in less than 4
sec to restore. Pushing the power button for more
than 4 seconds will power off the system.
Instant-Off
Pressing and then releasing the power button at
once will immediately power off your system.
