48
3
Award BIOS Setup Utility
OnChip USB
This field is used to enable or disable the onboard USB controller
supported by the chipset. If you are using a USB peripheral device,
make sure to set this field to Enabled.
USB Keyboard Support
By default, USB Keyboard Support is Disabled. However, if you are
using a USB keyboard under DOS, make sure to enable this function.
OnChip Sound
Select Auto if you are using the onboard audio controller supported
by the chipset.
OnChip Modem
Select Auto if you are using the onboard modem controller
supported by the chipset.
Spread Spectrum
Leave this field in its default setting. Do not alter this setting unless
advised by an engineer or technician.
Clock By Slight Adjust
This field provides several options for selecting the external system
bus clock of the processor. The available options allow you to adjust
the processors bus clock by 1MHz stepping.
Important:
Selecting an external bus clock other than 66MHz, 100MHz or
133MHz may result to the processors or systems instability
and are not guaranteed to provide better system performance.
If you selected an option and is unable to boot up the system, there
are 2 methods of going back to its default setting.
Method 1: Clear the CMOS data by setting jumper JP7 pins 2 and
3 to On. All fields in the BIOS Setup will automatically
be set to their default settings.
