www.dfi.com
Chapter 3 BIOS Setup
Chapter 3
33
Security
This section configures the trusted platform module (TPM) function.
TPM Availability
Show or hide the TPM availability and its configurations.
TPM Operation
Enable or disable the TPM function. It displays the following options:
•
No Operation: No changes to current state.
•
Disable: Disable and deactivate TPM.
•
Enable: Enable and activate TPM.
Clear TPM
Remove all TPM ownership contents.
Set Supervisor Password
Set the administrative password and the length of the password must be greater than
one character.
Install or Change the pass
-
word and the length of
password must be greater
that one character.
Current TPM Device
TPM State
TPM Availability
TPM Operation
Clear TPM
Supervisor Password
Set Supervisor Password
Main
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH20 Setup Utility
Security
Boot
Exit
Rev. 5.0
<TPM 2.0 (FTPM) >
Enabled, UnOwned
<Available>
<No Operation>
[]
Not installed
Smart Fan Function
This section configures the Smart Fan Function.
Enable/Disable Smart Fan
Smart Fan Function
SYS Smart Fan Control
Boundary 1
Boundary 2
Boundary 3
Boundary 4
Fan Speed Count 1
Fan Speed Count 2
Fan Speed Count 3
Fan Speed Count 4
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH20 Setup Utility
Rev. 5.0
<Enable>
[40]
[50]
[60]
[70]
[10]
[15]
[25]
[255]
SYS Smart Fan Control
Enable or disable the smart fan.
Boundary 1 to Boundary 4
Set the boundary temperatures that determine the operation of the fan with different
fan speeds accordingly. For example, when the system or the CPU temperature reaches
boundary temperature 1, the system or CPU fan should be turned on and operate at
the designated speed.
The range of the temperature is from 0 to 127
o
C.
Fan Speed Count 1 to Fan Speed Count 4
Set the fan speed. The range is from 0 (fan stop)-100% (full speed).
