www.dfi.com
37
Chapter 3 BIOS Setup
Chapter 3
PC Health Status
This field displays the PC health status.
PC Health Status
Voltage
VCORE
VBAT
1V35_SM
3VSB
5V
+12V
Temperature
CPU (
o
C/
o
F)
System (
o
C/
o
F)
Fan Speed
SYS FAN1
SYS FAN2
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH20 Setup Utility
Rev. 5.0
12.144 V
35 C/ 95 F
33 C/ 91 F
0 RPM
0 RPM
Smart Fan Function
This field displays the Smart Fan Function
0.832 V
3.040 V
1.344 V
3.408 V
5.056 V
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH20 Setup Utility
Rev. 5.0
COM Port 1
Base I/O Address
Interrupt
Type
COM Port 2
Base I/O Address
Interrupt
COM Port 3
Base I/O Address
Interrupt
COM Port 4
Base I/O Address
Interrupt
WDT
Case Open
AC Power Loss
PC Health Status
Smart Fan Function
Advanced
<Enable>
<3F8>
<IRQ4>
<RS232>
<Enable>
<2F8>
<IRQ3>
<Enable>
<3E8>
<IRQ4>
<Enable>
<2E8>
<IRQ3>
<Disable>
<Disable>
<Always off>
Configure Serial port using
options: [Disable] No Con
-
figuration [Enable] User
Configuration
Enable/Disable Smart Fan
Smart Fan Function
SYS Smart Fan1 Control
Boundary 1
Boundary 2
Boundary 3
Boundary 4
Fan Speed Count 1
Fan Speed Count 2
Fan Speed Count 3
Fan Speed Count 4
SYS Smart Fan2 Control
Boundary 1
Boundary 2
Boundary 3
Boundary 4
Fan Speed Count 1
Fan Speed Count 2
Fan Speed Count 3
Fan Speed Count 4
Advanced
F1
Help
↑/↓
Select Item
F5/F6
Change Values
F9
Setup Defaults
Esc
Exit
←/→
Select Item
Enter
Select
SubMenu
F10
Save and Exit
InsydeH20 Setup Utility
Rev. 5.0
<Enable>
[40]
[50]
[60]
[70]
[10]
[15]
[25]
[255]
<Enable>
[40]
[50]
[60]
[70]
[10]
[15]
[25]
[255]
SYS1/SYS2 Smart Fan Control
Enable or disable the system smart fan control.
Boundary 1 to Boundary 4
Set the boundary temperature. The range is from 0-127
o
C.
Fan Speed Count 1 to Fan Speed Count 4
Set the fan speed. The range is from 0 (no operation) to 255 (full speed). The fans
will operate according to the specified boundary temperatures above.
