www.dfi.com
13
Chapter 2 Hardware Installation
Chapter 2
Auto Power-on Select
3
1
2
3
1
2
JP6 is used to select the method of powering-on the system. If you want the system to pow-
er-on whenever AC power comes in, set JP6 pins 2 and 3 to On. If you want to use the power
button, set pins 1 and 2 to On.
When using JP6 “Power On” feature to power the system back on after a power failure occurs,
the system may not power on if the power lost is resumed within 5 seconds (power flicker).
1-2 On:
Power-on via power button
(default)
2-3 On:
Power-on via AC power
1
JP6
SATA 1/mSATA Signal Select
2-5-8-11, 3-6-9-12 On:
mSATA (default)
1-4-7-10, 2-5-8-11 On:
SATA 1
3
1
12
10
JP5 is designed to select the SATA or mSATA signal.
1
JP5
3
1
12
10
