www.dfi.com
12
Chapter 2 Hardware Installation
Chapter 2
Graphics Interfaces
The display ports consist of the following:
• 1 VGA port
VGA Port
The VGA port is used for connecting a VGA monitor. Connect the monitor’s 15-pin D-shell cable
connector to the VGA port. After you plug the monitor’s cable connector into the VGA port,
gently tighten the cable screws to hold the connector in place.
Driver Installation
Install the graphics driver. Refer to Chapter 4 for more information.
RJ45 LAN Ports
Features
• 1 Intel
®
I211AT PCI Express Gigabit Ethernet controllers
The LAN ports enable the system board to connect to a local area network by means of a net-
work hub.
BIOS Setting
Configure the onboard LAN in the “ACPI Configuration” submenu of the Advanced menu in the
BIOS. Refer to Chapter 3 for more information.
Driver Installation
Install the LAN drivers. Refer to Chapter 4 for more information.
LAN 1
VGA
LAN 1
VGA
VGA
