www.dfi.com
Chapter 1 Introduction
29
CPU Configuration
This section is used to configure the CPU. It will also display the detection of CPU information.
Intel Virtualization Technology
When this field is set to enabled, the VMM can utilize the additional hardware capabili-
ties provided by Vanderpool Technology.
When enabled, a VMM
can utilize the additional
hardware capabilities
provided by Vanderpool
Technology.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Advanced
→ ←:
Select Screen
↑↓:
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
30678
815
2001 MHz
Supported
4
Supported
24 KB x4
32 KB x4
1024 KB x2
[Enabled]
CPU Configuration
Intel(R) Celeron(R) CPU J1900 @ 1.99GHz
CPU Signature
Microcode Patch
CPU Speed
64-bit
Processor Cores
Intel VT-x Technology
L1 Data Cache
L1 Code Cache
L2 Cache
Intel Virtualization Technology
SATA Configuration
This section is used to configure the settings of SATA device.
Enable/Disable Serial
ATA
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
SATA Configuration
Serial-ATA (SATA)
SATA Mode
Serial-ATA Port 0
Serial-ATA Port 1
SATA Port0
Not Present
SATA Port1
Not Present
Advanced
Serial ATA Port 0 and 1
This field is used to enable or disable the Serial ATA port 0 and 1.
[Enabled]
[AHCI Mode]
[Enabled]
[Enabled]
→ ←:
Select Screen
↑↓:
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
