DFI BT968, User Manual

Page: 19 / 71

www.dfi .com Chapter 3 Hardware Installation
19
Chapter 3
Signal Pin# Module Pin Type Pwr Rail /Tolerance BT968 Carrier Board Description
ȟ
ȟ
ȟ
ȟ
PEG Signals Descriptions
P D94 NA ==> (ALL PEG)
PEG_TX13- D95 NA ==> (ALL PEG)
P C94
PEG_RX13- C95
P D98 NA ==> (ALL PEG)
PEG_TX14- D99 NA ==> (ALL PEG)
P C98
PEG_RX14- C99
P D101 NA ==> (ALL PEG)
PEG_TX15- D102 NA ==> (ALL PEG)
P C101
PEG_RX15- C102
PEG_LANE_RV# D54 I CMOS 3.3V / 3.3V NA (No support) NA (No support)
Signal Pin# Module Pin Type Pwr Rail /Tolerance BT968 Carrier Board Description
EXCD0_CPPE# A49
EXCD1_CPPE# B48
EXCD0_PERST# A48
EXCD1_PERST# B47
Signal Pin# Module Pin Type Pwr Rail /Tolerance BT968 Carrier Board Description
DDI/SD D26 Connect AC Coupling Capacitors 0.1uF to Device
DDI1_PAIR0-/SDVO1_RED- D27 Connect AC Coupling Capacitors 0.1uF to Device
DDI/SD D29 Connect AC Coupling Capacitors 0.1uF to Device
DDI1_PAIR1-/SDVO1_GRN- D30 Connect AC Coupling Capacitors 0.1uF to Device
DDI/SD D32 Connect AC Coupling Capacitors 0.1uF to Device
DDI1_PAIR2-/SDVO1_BLU- D33 Connect AC Coupling Capacitors 0.1uF to Device
DDI/S D36 Connect AC Coupling Capacitors 0.1uF to Device
DDI1_PAIR3-/SDVO1_CK- D37 Connect AC Coupling Capacitors 0.1uF to Device
DDI/SD C25
NA (No support) NA (No support)
DDI1_PAIR4-/SDVO1_INT- C26 NA (No support) NA (No support)
DDI/SDVO1_ C29 NA (No support) NA (No support)
DDI1_PAIR5-/SDVO1_TVCLKIN- C30 NA (No support) NA (No support)
DDI/SDVO1_F C15 NA (No support) NA (No support)
DDI1_PAIR6-/SDVO1_FLDSTALL- C16 NA (No support) NA (No support)
I/O PCIE AC coupled on Module
PD 100K to GND
(S/W IC between Rpu/PCH)
Connect to DP AUX+ DP AUX+ function if DDI1_DDC_AUX_SEL is no connect
I/O OD CMOS 3.3V / 3.3V
PU 2.2K to 3.3V, PD 100K to GND
(S/W IC between Rpu/Rpd
resistor)
Connect to HDMI/DVI I2C CTRLCLK HDMI/DVI I2C CTRLCLK if DDI1_DDC_AUX_SEL is pulled high
I/O PCIE AC coupled on Module
PU 100K to 3.3V
(S/W IC between Rpu/PCH)
Connect to DP AUX- DP AUX- function if DDI1_DDC_AUX_SEL is no connect
I/O OD CMOS 3.3V / 3.3V
PU 2.2K to 3.3V/PU 100K to 3.3V
(S/W IC between 2.2K/100K
resistor)
Connect to HDMI/DVI I2C CTRLDATA HDMI/DVI I2C CTRLDATA if DDI1_DDC_AUX_SEL is pulled high
DDI1_HPD C24 I CMOS 3.3V / 3.3V PD 100K PD 1M and Connect to device Hot Plug Detect DDI Hot-Plug Detect
DDI1_DDC_AUX_SEL D34 I CMOS 3.3V / 3.3V PD 1M
PU 100K to 3.3V for DDC(HDMI/DVI)
Selects the function of DDI1_CTRL and DDI1_CTRLDATA_AUX-.
DDI[n]_DDC_AUX_SEL shall be pulled to 3.3V on the Carrier with a 100K Ohm
resistor to configure the DDI[n]_AUX pair as the DDC channel.
Carrier DDI[n]_DDC_AUX_SEL should be connected to pin 13 of the DisplayPort
DDI D39
Connect AC Coupling Capacitors 0.1uF to Device
(This Port is BIOS Option with On board LVDS (DP to LVDS))
DDI2_PAIR0- D40
Connect AC Coupling Capacitors 0.1uF to Device
(This Port is BIOS Option with On board LVDS (DP to LVDS))
DDI D42
Connect AC Coupling Capacitors 0.1uF to Device
(This Port is BIOS Option with On board LVDS (DP to LVDS))
DDI2_PAIR1- D43
Connect AC Coupling Capacitors 0.1uF to Device
(This Port is BIOS Option with On board LVDS (DP to LVDS))
DDI D46
Connect AC Coupling Capacitors 0.1uF to Device
(This Port is BIOS Option with On board LVDS (DP to LVDS))
DDI2_PAIR2- D47
Connect AC Coupling Capacitors 0.1uF to Device
(This Port is BIOS Option with On board LVDS (DP to LVDS))
DDI D49
Connect AC Coupling Capacitors 0.1uF to Device
(This Port is BIOS Option with On board LVDS (DP to LVDS))
DDI2_PAIR3- D50
Connect AC Coupling Capacitors 0.1uF to Device
(This Port is BIOS Option with On board LVDS (DP to LVDS))
ȟ
ȟ
ȟ
ȟ
AC coupled off Module
O PCIE
O PCIE AC coupled off Module DDI 1 Pair 3 differential pairs/Serial Digital Video B clock output differential pair.
I PCIE
I PCIE AC coupled off Module
AC coupled off Module
DDI Signals Descriptions
O PCIE
DDI 2 Pair 0 differential pairs
(This Port is BIOS Option with On board LVDS (DP to LVDS))
AC coupled off Module DDI 1 Pair 0 differential pairs/Serial Digital Video B red output differential pair
I PCIE
O PCIE AC coupled off Module
DDI 2 Pair 2 differential pairs
(This Port is BIOS Option with On board LVDS (DP to LVDS))
O PCIE AC coupled off Module
DDI 2 Pair 1 differential pairs
(This Port is BIOS Option with On board LVDS (DP to LVDS))
DDI1_CTRL/SDVO1_CTRLCLK D15
DDI1_CTRLCLK_AUX-/SDVO1_CTRLDATA D16
AC coupled off Module DDI 1 Pair 2 differential pairs/Serial Digital Video B blue output differential pair
O PCIE AC coupled off Module DDI 1 Pair 1 differential pairs/Serial Digital Video B green output differential pair
O PCIE AC coupled off Module
O PCIE AC coupled off Module
DDI 2 Pair 3 differential pairs
(This Port is BIOS Option with On board LVDS (DP to LVDS))
O CMOS 3.3V /3.3V PCI ExpressCard: reset, active low, one per card
NA (No support)
ExpressCard Signals Descriptions
I CMOS 3.3V /3.3V
PCI ExpressCard: PCI Express capable card request, active low, one per
card
O PCIE AC coupled on Module NA (No support)
I PCIE AC coupled off Module NA (No support)
NA (No support)
NA (No support)
NA (No support)
NA (No support)
NA (No support)
NA (No support)
I PCIE AC coupled off Module NA (No support)
O PCIE AC coupled on Module NA (No support)
I PCIE AC coupled off Module
O PCIE AC coupled on Module NA (No support)