![background image](http://html1.mh-extra.com/html/dfi/al701/al701_user-manual_2490996010.webp)
10
Chapter 2
HARDWARE INSTALLATION
User's Manual |
AL701
X
Assembly
Note:
The carrier board is not included in the standard package and is typically custom-
ized.
Qseven Module
Qseven Socket
Key
Bracket Screw Hole
Bracket
MXM Connector
Bracket Screw Hole
Bracket Screw Hole
Bracket Screw Hole
Notch
Stand-off
Stand-off Screw Hole
Stand-off Screw Hole
Stand-off
Qseven Module
Qseven Socket
Key
Bracket Screw Hole
Bracket
MXM Connector
Bracket Screw Hole
Bracket Screw Hole
Bracket Screw Hole
Notch
Stand-off
Stand-off Screw Hole
Stand-off Screw Hole
Stand-off
Qseven Module
Qseven Socket
Key
Bracket Screw Hole
Bracket
MXM Connector
Bracket Screw Hole
Bracket Screw Hole
Bracket Screw Hole
Notch
Stand-off
Stand-off Screw Hole
Stand-off Screw Hole
Stand-off
1. Locat the Q7 socket on the carrier board. The photo below is an example of a Q7 car-
rier board with the Q7 socket encircled.
2. Locat the MXM connector, stand-offs, and the brackt on the carrier board. Align the
module to the MXM connector by matching the notch and the key. The screw holes on
the module shall also align to the stand-offs and the screw holes on the carrier board.
3. Insert golden finger end of the Q7 module into the slot while making sure 1) the notch
and the key are aligned, and 2) the other end rises away from the bracket as indicated
by the dotted and solid lines. Press the card firmly into the socket while applying and
maintaining even pressure on both ends until a distinctive click sounds.
4. Press down the end of the module that is close to the bracket and away from the con-
nector.