www.dfi.com
41
COM Port Configuration
This section configures serial port settings.
COM Port 1 to COM Port 6
Configure the settings of each serial port.
Disable
Disable the serial port.
Enable
Enable the serial port.
RS485 Auto Flow
Disable
Disable the RS485 auto flow mechanism.
Enable
Enable the RS485 auto flow mechanism.
Super IO
This section configures the system’s super I/O chip parameters.
Smart Fan Function
This section configures the Smart Fan Function.
SYS Smart Fan/CPU Smart Fan/SYS Smart Fan2 Control
Enable or disable the smart fan.
Boundary 1 to Boundary 4
Set the boundary temperatures that determine the operation of the fan with different
fan speeds accordingly. For example, when the system or the CPU temperature reaches
boundary temperature 1, the system or CPU fan should be turned on and operate at
the designated speed.
The range of the temperature is from 0 to 127
o
C.
Fan Speed Count 1 to Fan Speed Count 4
Set the fan speed. The range is from 0 (fan stop)-100% (full speed).
