7
STEP 4
increase power by pressing the (+) button and
move the position of the ball contacts if necessary
until you feel definite muscles contractions. if this is
uncomfortable, decrease power by pressing the (–)
button.
Note:
you will need to adjust the intensity level
when treating different areas of the face.
STEP 5
Hold the LiFt unit in position for 60 seconds to
complete treatment of the area.
after 60 seconds, reduce the power level before
moving onto the next treatment area.
STEP 6
after use, switch the unit off. Press and hold the
Programme/on/off button for 2 seconds.
Note:
if unit is left on, it will automatically switch off
after 10 minutes.
Handy tiPS
• Your teeth may feel slightly sensitive during treatment, this is
perfectly normal.
• Effective face toning and firming is based on a light and
gentle stimulating massage on your face muscles. Should you
experience any discomfort, you should add more conductive
gel, reduce the intensity by pressing the (-) button, or remove
the unit from the area being treated.
• Start at a low level to begin with until you get used to the
sensation.
• The forehead requires higher intensity levels. Press the (-) button
several times before returning to the facial area.
ENGLISHENGLISH
© The Dezac Group 2011
© The Dezac Group 2011
© The Dezac Group 2011
