VOIP-9001 SIP Phone Spec and Install
6
Ø
Electric requirements:
●
Voltage: 9V DC
●
Power: 9W (max.)
●
Power adapter: AC/DC input 100-230V，Output 9V 1A
●
Network interface:2X RJ-45 Ethernet Connectors
Ø
Size：
200 x 180 x 85 mm (L x W x H)
Ø
Installation:
1．
Connect handset to base: insert handset cord into handset cord jack at the
left side of the base.
2．
Connect IP phone to Internet: plug the RJ-45 Ethernet cable into the
Ethernet Jack. Plug the other end of the cable into HUB or switch.
3．
Power on IP phone: plug the power cord adapter into the Power Jack.
Then plug the other end of the power cord adapter into the appropriate
wall outlet.
With the installation done, users can chose the telephone keyboard，HTTP or
Telnet orders according the preference of each, and set the respective
parameters. Details may refer to the related chapters in the manual.
