VOIP-9001 SIP Phone Http Setup Guide (V1.42)
14
●
rtp port: RTP port is the port transferring and receiving voice packets
using UDP protocol. This is an even number between 1024 and 65535.
●
tos: Set the TOS field of the IP header of the RTP packets. The bigger
this value is 0, the higher priority the packet is 224.
●
outbound proxy : Enable/disable Outbound proxy by checking/clearing
this box. If the system has an Outbound Proxy，please set the URI of the
Outbound proxy into “sip proxy” and set the domain name of SIP proxy
server into “domain”. The default service port is 5060.
●
dtmf: Set DTMF signal sending way by selecting inband audio, rfc
2833 and sip info from list box.
●
dtmf payload : When DTMF select rfc 2833.This parameter can be
used indicating type of RTP payload type. The value can be use integer
96-101.
●
prack: Enable/disable support pre-ack(RFC3262) by checking/clearing
this box.
●
super password: Set the super password of the phone.(Default super
password is 12345678).
●
debug: Set the debug level of the phone.
n
disable: Disable output the debug message by selecting this item.
