Verteco 3 Installation
DIL-0149-0001
Revision - F
18/07/2019
7.
8.
9.
10.
11.
12.
13.
14.
Using the plug supplied, connect the
mains cable into the panel mount in
the side of the body.
Commission luminaires as required.
Insert locking screw
into the bracket as
shown to ensure the
luminaire is securely
attached to the
trunking.
Always ensure safety tethers (supplied) are threaded
through the suspension holes in the rear of the fitting
before moving on to subsequent fittings.
Suspended
NOTE: NOT RECOMMENDED FOR
CHAIN OR NON-RIGID FIXING
WHEN USED WITH SENSOR
(Suspension kit supplied
separately)
Suspend fitting by 2x suspension
Holes on rear of fitting.
Surface Mounted
Slide the mount
brackets out as
before.
Using the two black plastic spacers provided, secure the
fitting directly onto the surface using 4x suitable screws
each end (not provided).
Suspension toggles
to be inserted into
the two 7mm holes
as shown.
