14
13
|
B.
Use adaptor
(Fig.1/Pos.24B) to connect the power tool hose
Power tool/drywall sander hose(not including)
Power tool/drywall sander hose(not including)
Twisting the hose into the adaptor (anticlockwise)
MAINTENANCE
CAUTION!
Always disconnect the device before performing any adjustment or maintenance operation. If the supply
cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard.
Disconnect from the power supply immediately if the supply cord is damaged.
Take care not to expose this tool to the rain.
•
Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible.
•
We recommend that you clean the appliance immediately after you use it.
CLEANING
Avoid using solvents when cleaning plastic parts. Most plastic parts are susceptible to damage from various
types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon
dust, etc.
STORING
Store the machine, operating instructions and where necessary the accessories in the original packaging. In
this way you will always have all the information and parts ready to hand. Pack the device well or use the
original packaging in order to avoid transit damage. Always keep the machine in dry place.
DISPOSAL
Do not dispose of power tools into household waste! According the European Guideline 2012/19/
EU for Waste Electrical and Electronic Equipment and its implementation into national right, power
tools that are no longer usable must be collected separately and disposed of in an environmentally
correct manner.
Connect to power tool, drywall sander by using adaptor
Fig.1/Pos.24A or Fig.1/Pos.24B)
Select the suitable adaptor to connect the vacuum and power tools, there are two ways of connection while
using the different adaptor(A or B)
A. Use adaptor (Fig.1/Pos.24A) to connect the power tool hose.
GB
DE
GB
IT
GB
