2. SAFETY INSTRUCTIONS
• Never operate the saw without the pivot shoe in position. The spindle may strike
against the workpiece and damage the reciprocating mechanism.
• Hold the tool firmly.
• Do not touch the blade or the workpiece immediately after the sawing operation. It
may be extremely hot and could burn your skin.
SAFETY RULES FOR LASER LIGHTS
• The laser light used is the Class 2 continuous wave with maximum 1mW
power and 650nm wavelength. These lasers do not normally present an
optical hazard, although staring at the beam may cause flash blindness.
WARNING: Do not stare directly at the laser beam.
A hazard may exist if
you deliberately stare into the beam, please observe all safety rules as follows:
• The laser shall be used and maintained in accordance with the manufacturer’s
instructions.
• Never aim the beam at any person or an object other than the workpiece. It
will hurt your skin or corneal burns.
• The laser beam shall not be deliberately aimed at personnel and shall be
prevented from being directed towards the eye of a person.
• Always ensure the laser beam is aimed at a sturdy workpiece without
reflective surfaces. i.e. wood or rough coated surfaces are acceptable. Bright
shiny reflective sheet steel or the like is not suitable for laser use as the
reflective surface could direct the beam back at the operator.
• Do not attempt to change any parts of the laser guide. Do not change the
laser light assembly with a different type. Repairs must be carried out by the
laser manufacturer or an authorised agent.
LASER RADIATION DO NOT STEAR INTO BEAM
RADIATION LASER NE REGARDEZ PAS FIXEMENT LE FAISCEAU
LA RADIACIÓN DE LÁSER NO INYECTE DIRECTAMENTE AL RAYO
A RADIAÇÃO DE LASER NÃO INJETE DIRETAMENTE AO RAIO
LA RADIAZIONE DEL LASER NON FISSA IL RAGGIO
ΑΚΤΙΝΟΒΟΛΙΑ ΛΕΙΖΕΡ ΜΗ ΚΟΙΤΑΞΤΕ ΔΕΣΜΗ
PROMIENIOWANIA LASEROWEGO.NIE PATRZEĆ W WIĄZKĘ LASERA.
ЛАЗЕРНОЕ ИЗЛУЧЕНИЕ НЕ НАПРАВЛЯЕТ ЛУЧ В ГЛАЗА
ЛАЗЕРНОГО ВИПРОМІНЮВАННЯ НЕ НАПРАВЛЯТИ ПРОМІНЬ В ОЧІ
LAZER RADYASYONU INA GZLERINIZI DIKEREK BAKMAYN
RADIAŢIE LASER. NU PRIVIŢI FASCICUL.
EN60825-1:2014
Class 2 Laser Product.
• Always switch off the laser when not used.
CAUTION:
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
94
EN
Summary of Contents for 3 276005 567825
