Dexter Power 3 276005 567825, Legal And Safety Instructions

Page: 101 / 108

8. TROUBLE SHOOTING
Suspected malfunctions are often due to causes that the users can fix themselves. Therefore check the product using this section. In most cases
the problem can be solved quickly.
WARNING! Only perform the steps described within these instructions! All
further inspection, maintenance and repair work must be performed by an
authorised service centre or a similarly qualified specialist if you cannot solve the
problem yourself!
Problem Possible cause Solution
Product does not start Not connected to power supply Connect to power supply
Power cord or plug is defective Check by a specialist electrician
Other electrical defect to the product Check by a specialist electrician
Product does not reach full power Extension cord not suitable for operation with
this product Use a proper extension cord
Power source (e.g. generator) has too low voltage Connect to another power source
Air vents are blocked Clean the air vents
Unsatisfactory result Blade is worn Replace with a new one
Blade not suitable for workpiece material Use proper blade
9. DISPOSAL AND RECYCLING
Electrical products must not be thrown out with domestic waste. Recycle them at the special disposal centers provided for the
purpose. Contact your local authorities or stockiest for advice on recycling.
The potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and
electronic equipment.
For disposal, this tool also can be returned to the hardware store or vendor (or Dexter dealer).
101
EN