Dexter Laundry 900BS2.5, Instruction Manual

Page: 185 / 200

NOTE: Always lift the sander from the work before switching on or switch off.
We recommend the use of the dust extraction facility at all times. Simply slide the dust bag
onto the dust extraction port. For longer periods of use or on large pieces of work, it is
advisable to use a suitable vacuum cleaner.
5. BEFORE PUTTING THE EQUIPMENT INTO OPERATION
6. OPERATION
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
185
Plug the sander into a power point and with the sander belt tight, press the trigger
switch and then release it. The belt rotates for a short period.
Whilst the belt is running, adjust the tracking adjustment knob to align the belt to the
centre of the roller. 1.
2.
Repeat the trigger action and tracking adjustment until the belt is correctly aligned.
Run the sander for a minute or so to ensure correct alignment before using the sander on
a workpiece. 3.
4.
To start the sander, press the trigger switch.
To stop the sander, release the trigger switch.
If you press the lock on button while the trigger switch is depressed, the switch is kept in
the operating position. This is convenient when continuous operating for extended
periods of time is required.
To release the lock on button, press and release the trigger switch. 1.
2.
3.
4.
WARNING: Always check that the power supply is the same as that
indicated on the nameplate of the tool.
Switch on and off
Dust extraction