Dexter Laundry 900BS2.5, Instruction Manual

Page: 184 / 200

FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
5. BEFORE PUTTING THE EQUIPMENT INTO OPERATION
184
WARNING: Do not continue to use the sander with a sanding belt that
is overworn or damaged.
WARNING: Do not use the same sanding belt for wood and metal.
Metal particles become embedded in the belt and will scour a
wooden surface.
WARNING: Clean the air vents on your power tool regularly. The
motor’s fan will draw the dust inside the housing and excessive
accumulation of powdered metal may cause electrical hazards.
WARNING: For your safety, before plugging the tool into a power
point, ensure that the trigger switch is set to the “off”position.
GRIT CHART
Grit Type Example of use
60 or less
Very Coarse
Material removal, heavy paint removal,
shaping wood
80 – 100 Coarse
Paint removal, rough surface preparation
(e.g. non-planed wood)
120 – 150 Medium Surface preparation planed wood
180 – 220 Fine
Sanding between coats
240 or more Very Fine
Final finishing
Select the required grade of sanding belt.
Pull the belt tension lever.
Slip a sanding belt into position with the arrow on the inside of the belt pointing in the
same direction as the rotation indicator on the sander.
Fold down the lever.
1.
2.
3.
4.
Always ensure that the machine is switched off and plug is removed from the power
point before making any adjustment.
Attaching a sanding belt
Adjusting sanding belt tracking