NDS3107C Multiplexer User Manual
3.2 Initial Status
After powering on the device it will take a few seconds to initialize the system, and then the
LCD will show the device name and output valid and total bit-rate in the first row, while the 8
channels’ respective serial number, input real-time encoding bit-rate in the second row in turn.
It shows as below:
Dexin MUX3107C
P1:55.999Mbps P2:55.999Mbps
3.3 General Settings
By pressing LOCK key, users can enter in the main menu and set the input and output
parameters in the following editing interfaces, the LCD will display the following pages:
9
