NDS3208 8 in 1 MPEG-2
Encoder User’s Manual
8 / 29
2.4.2 ASI output cable illustration:
2.4.3 Network Cable illustration (CAT5):
2.4.4 Unbalanced audio and CVBS video input connection
User can firstly find the CVBS input connector on the device according to the connector mark
described on the rear panel illustration, and then connect the analog CVBS video and
unbalanced audio cables (in the accessories). One end is connected to the signal source
equipment while the other end to the encoder‟s CVBS input port. The encoder‟s Analog
Composite Video input port and its connection are illustrated as follows:
2.4.5 ASI output interface connection
