ATTENTION!
WARNING!
Service hotline
In the case of technical problems, contact our Service hotline. Switzerland:
Tel. 0900 00 1675 (national charges, Swisscom at time of going to print:
CHF 2.60/min). In the case of claims under the terms of guarantee, contact
your sales outlet.
Maintenance
Clean the surface of the housing with a soft, fluff-free cloth. Do not use any
cleaning agents or solvents.
Guarantee
Dexford equipment is produced and tested according to the latest produc-
tion methods. The implementation of carefully chosen materials and highly
developed technologies ensure trouble-free functioning and a long service
life. The terms of guarantee do not apply to the batteries or power packs
used in the products. The period of guarantee is 24 months from the date
of purchase. All deficiencies related to material or manufacturing errors
within the period of guarantee will be redressed free of charge. Rights to
claims under the terms of guarantee are annulled following tampering by
the purchaser or third parties. Damage caused as the result of improper
handling or operation, normal wear and tear, incorrect positioning or
storage, improper connection or installation or Acts of God and other
external influences are excluded from the terms of guarantee. In the case
of complaints, we reserve the right to repair defective parts, replace them
or replace the entire device. Replaced parts or devices become our pro
-
perty. Rights to compensation in the case of damage are excluded where
there is no evidence of intent or gross negligence by the manufacturer. If
your device does show signs of a defect within the period of guarantee,
please contact the sales outlet where you purchased the Dexford device,
producing the purchase receipt as evidence. All claims under the terms
of guarantee in accordance with this agreement can only be asserted at
the sales outlet. No claims under the terms of guarantee can be asserted
after a period of two years from the date of purchase and hand-over of the
product.
Disposal
In order to dispose of your device, take it to a collection point
provided by your local public waste authorities (e.g. recycling
centre). According to the laws on the disposal of electronic and
electrical devices, owners are obliged to dispose of old electronic
and electrical devices in a separate waste container. The adjacent
symbol indicates that the device must not be disposed of in normal
domestic waste!
You are legally obliged to dispose of power packs and batteries
at the point of sale or in the corresponding containers provided at
collection points by local public waste authorities. Disposal is free of
charge. The symbols indicate that the batteries must not be disposed of in
normal domestic waste and that they must be brought to collection points
provided by local public waste authorities. Packaging materials must be
disposed of according to local regulations.
Declaration of Conformity
This device fulfils the requirements stipulated in the Directive
1999/5/EC on radio equipment and telecommunications terminal
equipment and the mutual recognition of their conformity. Conformi
-
ty with the above mentioned directive is confirmed by the CE mark on the
device. To view the complete Declaration of Conformity, please refer to the
free download available on our web site www.dexford.com.
ENGLISH
WS 2200
Weather Station with wireless-thermometer
and clock
Operating Instructions
Please read and observe the following information and keep the
operating manual nearby for future reference!
Safety information
Only use batteries of the same type!
Always treat batteries with due care and attention and only use
batteries as described.
Never use standard and rechargeable batteries together. Never use
rechargeable batteries or standard batteries with different capacities or
charge statuses together. Never use standard or rechargeable batteries
which are damaged.
Risk of suffocation through small objects, packaging and protective foil!
Keep children away from the product and its packaging!
Risks to health and the environment from batteries!
Never open, damage or swallow batteries or allow them to pollute the
environment. They could contain toxic and ecologically harmful heavy
metals.
Prevent exposure to environmental influences, e.g. smoke, dust,
vibration, chemicals, moisture, heat and direct sunlight.
Only allow repairs to be completed by qualified personnel.
Display icons and operating elements
1 Weather Forecast
2 Indoor temperature, humidity, trend
➙ ➚ ➘
3 Outdoor temperature, trend
➙ ➚ ➘
4 Snooze
5 Time
6 Date
7 Comfort index
8 Sensor symbol
9 Alarm
10 Hanging hole
11 Battery compartment cover
12 Table stand
A SET
B ALARM
C CHANNEL
D DOWN (Press the key to switch between °C or °F)
E UP
F SNOOZE
G SNOOZE / LIGHT
a Change from °C / °F
b Change channel
MANUAL SET-UP
(The clock automatically changes from set-up mode to time display mode if
no keys are pressed for 20 seconds.)
Press and hold key “
SET“ for approx. 2 seconds.
The display for the year is flashing. Use “UP
“ and “
DOWN
“ to select the
year.
Press “
SET“ to confirm.
The display for the month is flashing. Use “UP
“ and “
DOWN
“ to select
the month.
Press “
SET“ to confirm.
The display for the date is flashing. Use “UP
“ and “
DOWN
“ to select
the date.
Press “
SET“ to confirm.
The language selection for the display of the weekdays is flashing. Use
“
UP
“ and “
DOWN“ to select the language. (EN for English)
Press “
SET“ to confirm.
The 12/24 hour flashing. Use “UP
“ and “
DOWN
“ to select
Press “
SET“ to confirm.
The display for the hour is flashing. Use “UP
“ and “
DOWN
“ to select the
hour.
Press “
SET“ to confirm.
The display for the minutes is flashing. Use “UP
“ and “
DOWN
“ to select
the minutes.
Press “
SET“ to confirm.
Alarm set-up
Press “
ALARM
“ to switch from time display to
AL
display
Press and hold the key “
ALARM“ for approx. 2 seconds ,the flashing
alarm time are shown. The hour display of the alarm time is flashing.
Use “
UP
“ and “
DOWN
“ to select the hour.
Press “
ALARM“ to confirm.
Then follow the minutes. Use “
UP
“ and “
DOWN
“ to select the minutes,
Press “
ALARM“ to confirm.
Alarm on/off
When showing
AL
alarm time, press “
SET
“ to activate the alarm
with alarm symbol showing.
Press “
SET
” again cancel the alarm
Snooze function
Press the key “
SNOOZE/LIGHT
“, while the alarm sounds, to activate
the snooze function. The alarm repeat after 5 minutes.
The snooze function can be stopped by pressing any key.
Max./ Min. for the indoor/outdoor temperature and humidity
Press “
UP” for displaying indoor/outdoor max./min. of temperature
and humidity, hold “
UP
“ for more than approx. 3 seconds to clear up the
max./min.
Temperature alert set-up
As an example this allows to get a frost damage warning. The main unit will
give an alarm signal when the set temperature limit is reached.
Press and hold the key “
DOWN“ for approx. 3 sec., ON/OF is flashing
Use “
UP
“ and “
DOWN“ to select ON/OF.
Press “
SET” , the upper limit temperature is flashing,
Use “
UP
“ and “
DOWN
“ to set the maximum alert temperature.
Press “
SET “, the lower limit temperature is flashing,
Use “
UP
“ and “
DOWN
“ to set the minimum alert temperature.
Press “
SET“ to confirm.
When the alert is activated, the alert symbol (
) will be shown.
The set-up process cannot be completed if the maximum temperature
selected is lower than the minimum selected temperature.
The minimum temperature selected must at least be 1°C below the maxi
-
mum selected temperature.
Illumination
Press the key “
SNOOZE/LIGHT
“ to activate the display illumination for
20 seconds.
Comfort index
Comfortable
Dry
Wet
PLEASE NOTE!
There is no comfort display when temperature is not in
20-27°C range and humidity is in 40-70% range
WEATHER FORECAST
Sunny Slightly Sunny Cloudy Rainy
The weather station analyzes the weather patterns from the past 24 hours
to determine the forecast for the next 12 – 24 hours. The weather forecast
is only for reference and domestic use. Accuracy rate might be lower in
extreme conditions.
Package contents
1 Weather station main unit, 1 Thermo-sensor, Operating manual
Thermo-sensor
During initial installation, the unit may take up to an hour or more to
acclimatise to current conditions. It is recommended to put the main
unit in the room where it will be used at least 1 hour prior to initial
installation.
STARTING UP
After inserting the batteries, the station is now connecting to the
thermo sensor. This process takes about 3 minutes. Then the display
shows the outdoor temperature. In case of failure of reception, pls
press“
CHANNEL“ (C) for more than approx. 3 sec. to receive again.
The weather station is capable of receiving up to 3 different channels.
Select the channel number (1, 2, or 3) by pressing the “b” switch.
The weather station will scan the 3 channels automatically.
Select the channel number (1, 2, or 3) by pressing the “CHANNEL
”
button (C) on weather station.
Please observe a minimal distance of 2.5m to sources of interference
such as televisions or computer screens.
Feature
Value
WS 2200
W x H x D
80 x 160 x 20 mm
Weight
134 g (without battery)
Signal frequency
433 MHz
Power
2 x 1,5V AAA, not included
Temperature range
0 ~ +50 °C
Humidity range
20 ~ 90 %
Thermo-sensor, max. 30 meters in open area
W x H x D
60 x 95 x 27 mm (including stand)
Weight
55 g (without battery)
Power
2 x 1,5V AAA, not included
Temperature range
-20 ~ +50 °C
To use for indoor and outdoor
Technical data (All rights reserved)
LCD
display
11
b
a
12
10
1
2
3
4
6
B
C
G
F
E
A
D
7
5
8
9
11
12
10