6
Introduction
Please read these operating instructions thor-
oughly and carefully. They are part of this
product and contain important instructions
relating to its operation and handling. Please
always observe all safety instructions. Before
initial operation, please check that all parts are
fi tted correctly. If you have any questions or
are unsure about handling of the device,
please contact the dealer or the service offi ce.
Please keep these instructions in a safe place
and pass them on to anyone else intending to
use the device.
Proper use
The gas alarm indicates a leakage of methane,
propane or butane gas from appliances, lines,
etc. with a high-frequency tone and a fl ashing
red ALARM LED
햴
. It is intended for use in
dry areas inside buildings, vehicles, caravans
and boats. The power supply is either by way
of a 12 V DC mains adapter connected to the
230 V ~ 50 Hz mains electricity or by connec-
tion to the 12 V DC on-board power supply
system of a car, caravan or boat. The device is
for private use only. Any other use or modifi ca-
tion of the device constitutes improper use
and poses a serious risk of accident. The
manufacturer is not liable for damage caused
by improper use or incorrect operation of the
device. Before initial operation, please read all
operating instructions carefully and refer to the
page showing the illustrations. Keep these
operating instructions in a safe place. Please
pass on all supplied documents along with the
device to anyone else intending to use it.
Pack contents
We supply the gas alarm with the following
components (see Fig. A ):
1x gas alarm
1x 12 V DC mains adapter
1x mounting fi xture
2x fastening screws
2x wall plugs
1x operating instructions
Features
On the front of the casing (see Fig. A):
햲
Front of casing
햳
Piezo siren opening
햴
ALARM
LED
햵
POWER
LED
햶
12 V DC mains adapter connecting cable
On the rear of the casing (see Fig. B):
햷
Rear of casing
IB_GA607_UK_IRL_Content.indd 6
IB_GA607_UK_IRL_Content.indd 6
20.09.2005 13:59:52 Uhr
20.09.2005 13:59:52 Uhr
