English
13
Intercom
Your handset and base station is pre-registered� Up to five handsets can be registered to the
base station� Each new handset is assigned in sequential order� The number is shown on the
display� The base unit should be positioned centrally so that the coverage area is roughly equal
for all handsets�
If for some reason, the handset is not registered to the base station (
OUT OF RANGE OR NO
PWR AT BASE
is displayed even when the handset is near the base station), register your
handset according to the following procedure�
Find handset
Press the find handset icon (
J
)
on the telephone base once� The handset rings and the
display shows
**PAGING**
� To stop:
• Press the find handset icon on the telephone base again�
• Press
q
/
FLASH
,
or any dialing key (0-9,
or )�
• Place the handset in the telephone base or charger�
Add and register additional handset
1� Place the new handset in the telephone base or charger�
2� On the telephone base: press and hold the find handset icon
J
for 5-8 seconds�
3� On the handset: remove the handset from the telephone base or charger�
Press
MENU
/
SELECT
â
REGISTRATION
OR press and
REGISTERING��� PLEASE WAIT
is displayed�
When the registration is complete,
HANDSET REGISTERED
is displayed�
If the handset registration is successful, you will hear a confirmation tone� The handset will
automatically be allocated the next available handset number� If the handset registration is
unsuccessful, the
OUT OF RANGE OR NO PWR AT BASE
will again be displayed�
Replace handset
If you want to replace a handset or reassign the designated handset number, you must
unregister all handsets and then individually register each handset�
On the telephone base: press and hold the find handset icon
J
for about 10 seconds, then
press
J
again�